Vehicle Specifications
LITEACE VAN,WAGON
MRF TD
(8509- )1C,2C#
BLOCK SUB-ASSY, CYLINDER
2CT..CM30,40
2CT..CM30,40
2CT..CM30,40
2CT..CM30,40
FLANGE(FOR WATER BY-PASS)
1C,2C#..CM3#,4#
COCK SUB-ASSY, WATER DRAIN(FOR CYLINDER BLOCK)
1C,2C#..CM3#,4#
PLUG, WATER DRAIN COCK(FOR CYLINDER BLOCK)
1C,2C#..CM3#,4#
BOLT(FOR CRANKSHAFT BEARING CAP SET)
1C,2C#..CM3#,4#
PLUG, TIGHT, NO.1(FOR CYLINDER BLOCK)
1C,2C#..CM3#,4#
PLUG, TIGHT, NO.2(FOR CYLINDER BLOCK)
1C,2C#..CM3#,4#
PLUG, TIGHT, NO.3(FOR CYLINDER BLOCK)
1C,2C#..CM3#,4#
1C,2C#..CM3#,4#
PLUG, TIGHT, NO.4(FOR CYLINDER BLOCK)
1C,2C#..CM3#,4#
1C,2C#..CM3#,4#
PLUG, TIGHT, NO.5(FOR CYLINDER BLOCK)
1C,2C#..CM3#,4#
1C,2C#..CM3#,4#
PLUG, TIGHT, NO.6(FOR CYLINDER BLOCK)
PLUG, W/HEAD STRAIGHT SCREW, NO.1(FOR CYLINDER BLOCK)
2CT..CM30,40 FOR MANIFOLD
2CT..CM30,40 FOR OIL PRESSURE S/W
PLUG, W/HEAD STRAIGHT SCREW, NO.2(FOR CYLINDER BLOCK)
2CT..CM30,40
PLUG, W/HEAD STRAIGHT SCREW, NO.3(FOR CYLINDER BLOCK)
1C,2CT..CM30,35,40
GASKET, STRAIGHT SCREW PLUG NO.1(FOR CYLINDER BLOCK)
1C,2CT..CM30,35,40
GASKET, STRAIGHT SCREW PLUG NO.2(FOR CYLINDER BLOCK)
2CT..CM30,40
GASKET, STRAIGHT SCREW PLUG NO.3(FOR CYLINDER BLOCK)
1C,2CT..CM30,35,40
PIN, STRAIGHT (FOR CYLINDER HEAD SET)
1C,2C#..CM3#,4# ’·‚іЃЃ‚XЃCЉOЊaЃЃ‚P‚S
PIN, STRAIGHT(FOR ENGINE REAR OIL SEAL)
1C,2C#..CM3#,4# ’·‚іЃЃ‚P‚PЃCЉOЊaЃЃ‚U
PIN, STRAIGHT(FOR END PLATE)
1C,2C#..CM3#,4#
ORIFICE, CYLINDER BLOCK OIL
1C,2C#..CM3#,4#
GUIDE, OIL LEVEL GAGE
1C,2C#..CM3#,4#
2CT..CM30,40
SUPPORT, OIL LEVEL GAGE GUIDE
2CT..CM30,40
PAN SUB-ASSY, OIL
2CT..CM30,40
PLUG(FOR OIL PAN DRAIN)
1C,2C#..CM3#,4#
GASKET(FOR OIL PAN DRAIN PLUG)
1C,2C#..CM3#,4#
1C,2C#..CM3#,4#
PAN, OIL NO.2
1C,2C#..CM3#,4#
GAGE SUB-ASSY, OIL LEVEL
1C,2C#..CM3#,4#
2CT..CM30,40
VALVE SUB-ASSY, OIL CHECK
2C#..CM30,36,4#
NOZZLE SUB-ASSY, OIL, NO.1
2C#..CM30,36,4#
Vollen Katalogzugriff freischalten
Abonnieren Sie einen unserer Premium-Pläne, um OEM-Teilenummern anzuzeigen, die VIN-Suche ohne Einschränkungen zu nutzen und auf Ihre persönliche Garage zuzugreifen.
Die Informationen dienen nur zu Referenzzwecken. Die Verantwortung für die Auswahl liegt beim Benutzer.